what's the output of q libr * f=d q dev * f=d q path * f=d -- Warm regards, Michael Green
On Sun, May 16, 2010 at 11:29 PM, Len Boyle <[email protected]> wrote: > Howard did you update all the lto-2 carts to read/only? > > > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of > Howard Coles > Sent: Sunday, May 16, 2010 4:16 PM > To: [email protected] > Subject: Re: [ADSM-L] LTO2s not mounting in LTO4 drives > > We first replaced only 8 of the drives, so that I could see whether all the > tapes would mount there. I noted that LTO2s were mounting in the LTO4s > readonly. However, this was the first time I tried to move data from an LTO2 > pool since turning on encryption in the Library. At first I thought that may > have something to do with it, but the LTO3 pools are not encrypted, and they > mount up just fine. > > See Ya' > Howard Coles Jr. > Sr. Systems Engineer > (615) 296-3416 > John 3:16! > > > > -----Original Message----- > From: ADSM: Dist Stor Manager on behalf of Richard Sims > Sent: Sun 5/16/2010 2:46 PM > To: [email protected] > Subject: Re: [ADSM-L] LTO2s not mounting in LTO4 drives > > Howard - > > Presumably, you would have tested the ability to read the old LTO2 > tapes at the OS level, before committing to TSM use, via tapeutil or > the like, so as to assure technology usability. Did that work, or > turn up any anomalies? > > Technote 1269453 indicates that LTO2 tapes should be usable in an LTO4 > environment, providing that the stipulated actions are undertaken. > The technote doesn't say whether any path redefinition is needed to > make it work, however. I'd use SHow LIBRary to do the most reveal on > what TSM thinks of the arrangement. Beyond that, you may have to > contact TSM Support. > > Richard Sims >
