Yes, got it! Thank you, Julien.
Best Regards, william -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of MALGHEM Julien Sent: Thursday, June 10, 2010 2:33 PM To: [email protected] Subject: Re: [ADSM-L] volume missed in library Hello William, With this checkin command, the label was checked by reading it on the tape (not with the barcode). There is no reason to lose data if the tape is ok. You can check with the admin interface of the library if the barcode is correctly seen by the interface. If not, it's probably a problem with the barcode itself. So, you can change the label or move data to another tape if you wants to be sure the tape is readable. Best regards, Julien Julien Malghem Ingénieur Système / Spécialiste Stockage [email protected] 2 Ter rue Marcel Doret 31700 Blagnac www.rbs.fr RBS Solutions Tél. : +33 (0)5 34 47 76 77 • Portable : +33 (0)6 60 26 61 52 • Fax : +33 (0)5 34 47 14 14 Un problème ? Contactez le Centre de Support RBS au 0892 70 12 12 (0,34€/mn) ou écrivez à [email protected] Intéressé(e) par nos solutions ? Contactez notre service commercial à [email protected] Intéressé(e) par notre programme de partenariat ? Contactez notre service alliance à [email protected] Ce message et ses éventuelles pièces jointes sont établies à l'intention exclusive de son ou de ses destinataires. Toute utilisation, diffusion ou publication non autorisée est prohibée. Ready Business System SA décline toute responsabilité au titre de ce message s'il a été altéré ou falsifié. Il ne contient aucun virus, mais il est de la responsabilité de son destinataire de s'en assurer. Merci de n'imprimer ce message ou ses pièces jointes que si cela s'avère nécessaire. -----Message d'origine----- De : ADSM: Dist Stor Manager [mailto:[email protected]] De la part de William ZHANG Envoyé : jeudi 10 juin 2010 03:51 À : [email protected] Objet : Re: [ADSM-L] volume missed in library And now I run command "checkin libvol LIBNEO4000 search=bulk status=private" It seems that library recognize that missed volume: LIBNEO4000 000456L3 Private SHITSM01 132 But I am not sure that data on this volume can be get back, any comment? Thank you! From: William ZHANG Sent: Thursday, June 10, 2010 9:26 AM To: '[email protected]' Subject: volume missed in library Hello All, I made mistake: My tape library overland neo4000 occurs a HW fail when move volume media. And then I take this volume out of tape library (want to put it again) and run command "audit library LIBNEO4000 checklabel=barcode" Then , that missed volume disappeared from tape library using "query libvol" , I think there are important data in that volume. So how can I put that volume into tape library again and do not make data missed ? or can I do " audit volume vol_name fix=yes" to let TSM backup missed data again? If there are archived data, is there any way to get them back? Warm regards, william
