We had something similar, also with a STK SL500 with LTO4 drives, but it
turned out to be the FC HBA in the TSM server system.

Roger Deschner      University of Illinois at Chicago     [email protected]
== "History does not repeat itself, but it does rhyme." -- Mark Twain ==



On Fri, 20 Aug 2010, Dury, John C. wrote:

>We have an STK SL500 tape library with 4 LTO4 drives in it and it seems to 
>randomly take all of the drives offline. STK/Sun has replaced the robot and 
>controller card (more than once) and nothing seems to help. This has been 
>going on for several months now and I'm at a loss to figure out what is 
>causing it. The SL500 and it's drives are all attached to a Brocade DS-4900 
>switch. Nothing has changed on the switch in over a year as putting 
>maintenance on them is a real chore since we have so many devices attached to 
>it.  The only message I see in the act log is:
>ANR8848W Drive WRLTO4-1 of library WRSL500 is
> inaccessible; server has begun polling drive. (PROCESS:
> 832)
>As best I can tell, it is a hardware problem as even rebooting the robot or 
>power cycling  the whole box doesn't fix it. The robot stays parked at the top 
>and never seems to go through the audit it usually does when it is rebooted. 
>If it is indeed a hardware problem, I realize there isn't much that can be 
>done but they have replaced almost all the parts in the box and it keeps 
>happening. Anyone else ever have similar problems?
>John
>

Reply via email to