Hi, Let say your library having 10 drives and 400 slots , now you want to create two partition then..
Logical partition A --- 4 drive and 150 slots---TSMserver A Logical partation B--3 drives and 100 slots---TSMserverB so now you created two partition and used 7 drives and 250 slots... your 3 drives and 150 slots are unassigned.that can be use for further partition or later on added to existing partition.. Key thing--- you can not use drives from partition A for TSMSERVERB same applicable to TSMSERVERA cannot use logical partition B drives... For slots , it can be adjusted based on physical count, here if you are looking for VIO then you need to subtract total VIO slots from physical slots then assign to purgation.. In ALMS the control path is managed by drives assignment - means you need to manage from library console. Once partition is created with VIO then on TSM /OS side you have visibility for only assigned partition based on zoning and drives assignment ...so on tsm/os side it is same as normal library 3500.. so when you issue the tapeutil command the output will be similar as stand-alone library only difference is you will have IO slots from Virtual IO and drives/slots from ALMS... Regards, Ajay Patel From: Francisco Molero <[email protected]> To: [email protected], Date: 02/09/2012 07:40 AM Subject: Re: [ADSM-L] TS3500 ALMS question.. Sent by: "ADSM: Dist Stor Manager" <[email protected]> Hi again, I want to avoid to have TSM Servers with TLS. Former 3494 library had an option to add categories when we defined the library in TSM, then you also define the category and 3494 was able to distinguish the cartridge among TSM Servers. On the other hand you could join drives to TSM Servers even the same drive to several TSM Servers.. Now I am investigating with ALMS. I am looking for this feature or similar but I don't know if it is possible in TS3500 with ALMS feature. Regards, Fran ________________________________ De: Robert J Molerio <[email protected]> Para: [email protected] Enviado: Jueves 9 de febrero de 2012 14:56 Asunto: Re: TS3500 ALMS question.. Well, I have 5 TSM instances living in the same LPAR and all the drives are defined to all TSM instances. Library sharing is turned on. On Thu, Feb 9, 2012 at 8:47 AM, Jorge Amil <[email protected]> wrote: > Hello, > I´m not sure about it. > Meaby,in the same logical partition, you must define X drives for TSM1 and > the others for TSM2. > Where i work whe have two tsm servers but server 1 is the library manager > of server2. > > Let´s wait for other colleagues answers. > > Jorge > > > Date: Thu, 9 Feb 2012 05:15:08 -0800 > > From: [email protected] > > Subject: [ADSM-L] TS3500 ALMS question.. > > To: [email protected] > > > > Hello colleagues, > > > > Is it possible to use drives and slots for two TSM Servers in a logical > same partition in a TS3500 with ALMS feature ?? > > > > Thanks > > Fran > >
