Hi All, Sorry for the long debug....
I wonder if anyone had this issue with TSM: 6.2.3.100 and DD890: OS 5.1.0.5-269447 1) TSM Server's happily writing to a vTape 2) At the same time, the VTL pool replication pair is setup on DD console, causing this series of error messages on TSM server: 2012-07-06 10:37:01.000000,8337,I,ANR8337I LTO volume 440090 mounted in drive DRV1 (/dev/rmt/r44d1st). (PROCESS: 838),SERVER,,,,,,,,838,8973 2012-07-06 10:37:01.000000,513,I,ANR0513I Process 838 opened output volume 440090. (PROCESS: 838),SERVER,,,,,,,,838,8974 ... 2012-07-06 11:48:58.000000,8302,E,"ANR8302E I/O error on drive DRV1 (/dev/rmt/r44d1st) with volume 440090 (OP=WRITE, Error Number=5, CC=0, rc = 6, KEY= 00, ASC=0C, ASCQ= 00, SENSE=............ 2012-07-06 11:48:58.000000,8359,E,ANR8359E Media fault detected on LTO volume 440090 in drive DRV1 (/dev/rmt/r44d1st) of library R44. (PROCESS: 838),SERVER,,,,,,,,838,9876 2012-07-06 11:48:58.000000,1411,W,ANR1411W Access mode for volume 440090 now set to "read-only" due to write error. (PROCESS: 838),SERVER,,,,,,,,838,9877 2012-07-06 11:48:58.000000,515,I,ANR0515I Process 838 closed volume 440090. (PROCESS: 838),SERVER,,,,,,,,838,9878 2012-07-06 11:48:59.000000,8302,E,"ANR8302E I/O error on drive DRV1 (/dev/rmt/r44d1st) with volume 440090 (OP=OFFL, Error Number=5, CC=0, rc = 6, KEY= 00, ASC=0C, ASCQ= 00, SENSE=......... 2012-07-06 11:49:00.000000,8469,E,ANR8469E Dismount of LTO volume 440090 from drive DRV1 (/dev/rmt/r44d1st) in library R44 failed. (PROCESS: 838),SERVER,,,,,,,,838,9885 2012-07-06 11:49:00.000000,8475,I,ANR8475I Dismount of volume 440090 failed. It may still be in the drive. (PROCESS: 838),SERVER,,,,,,,,838,9886 2012-07-06 11:49:05.000000,8302,E,"ANR8302E I/O error on drive DRV1 (/dev/rmt/r44d1st) with volume 440090 (OP=OFFL, Error Number=5, CC=0, rc = 1, KEY= 00, ASC=52, ASCQ= 00, SENSE=...... 2012-07-06 11:49:07.000000,8848,W,ANR8848W Drive DRV1 of library R44 is inaccessible; server has begun polling drive. (PROCESS: 839),SERVER,,,,,,,,839,9900 ... 2012-07-06 11:57:54.000000,8779,E,"ANR8779E Unable to open drive /dev/rmt/r44d1st, error number= 5. (PROCESS: 839)",SERVER,,,,,,,,839,10364 ... 2012-07-06 12:00:41.000000,8471,E,ANR8471E Server no longer polling drive DRV1 in library R44 - path /dev/rmt/r44d1st will be marked off-line. (PROCESS: 839),SERVER,,,,,,,,839,10429 2012-07-06 12:00:42.000000,8873,E,ANR8873E The path from source TECO44 to destination DRV1 (/dev/rmt/r44d1st) is taken offline. (PROCESS: 839),SERVER,,,,,,,,839,10430 3) We then try audit libr but the volume remains mounted on dd. 4) We try to delete path and drive + define drive and path but, this time, TSM doesn't recognize the drive as being LTO and defines it as "generic". 5) Finally, we try a physical (virtual) move of the tape at the DD console, but: costaju@angelina# vtl tape show r44 barcode 440090L3 Processing tapes.... Barcode Pool Location State Size Used (%) Comp ModTime -------- ---- ----------- ----- ------- ------------------ ---- ------------------- 440090L3 r44 r44 drive 1 RW 400 GiB 129.5 GiB (32.37%) 12x 2012/07/06 11:48:58 -------- ---- ----------- ----- ------- ------------------ ---- ------------------- costaju@angelina# vtl tape move r44 source drive 1 destination slot 91 No vtc_private available So, anyone knows how to solve this ? Thanks in advance, Justino Costa Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
