try to audit library with refresh=yes and checkl=barcode
On Tue, Jan 15, 2013 at 12:23 AM, Bob Levad <[email protected]> wrote: > Tim, > > The info given by the library should match what q libvol shows. You maybe > should run an audit library to see it clears things up. > > Bob. > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Tim > Brown > Sent: Monday, January 14, 2013 11:20 AM > To: [email protected] > Subject: Re: [ADSM-L] checkin tape to tsm lto libary > > Yes we assigned it to logical library_a which is the only library we have > All the other tapes in the library are assigned to library_a > > Should I see the same list of tapes via the TS3310 web page for data > cartridges that > I see as a result of q libv tsmlibr > > Some of the entries in the "data cartridges" section via the web page don't > exist in the q libv tsmlibr command > and some that appear in q libv tsmlibr don't exist entries in the "data > cartridges" section via the web page > > > Thanks, > > Tim > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of > Richard van Denzel > Sent: Monday, 14 January, 2013 11:37 AM > To: [email protected] > Subject: Re: checkin tape to tsm lto libary > > Did you phiscally assign it to the library on the library? > > Met vriendelijke groet, > Richard van Denzel > +31 (0)6 15 83 82 48 > -----Oorspronkelijk bericht----- > Van: ADSM: Dist Stor Manager [mailto:[email protected]] Namens Ballenger, > Craig > Verzonden: maandag 14 januari 2013 17:24 > Aan: [email protected] > Onderwerp: Re: [ADSM-L] checkin tape to tsm lto libary > > Did you check the tape in to the library and assign it to the correct pool? > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Tim > Brown > Sent: Monday, January 14, 2013 11:06 AM > To: [email protected] > Subject: [ADSM-L] checkin tape to tsm lto libary > > Have a LTO tape that was previously written to. It was outside the library so > we inserted it to do a reclaim process. > > After it was inserted we attempted a checkin command but the results show no > volume found. > > CHECKIN LIBVOLUME TSMLIBR SEARCH=YES VOLLIST=A00027L5 STATUS=PRIVATE > CHECKLABEL=BARCODE > > ANR8431I CHECKIN LIBVOLUME process completed for library TSMLIBR; 0 volume(s) > found. > > Status of tape to TSM > > tsm: TSMPOK_SERVER1>q vol a00027l5 f=d > > Volume Name: A00027L5 > Storage Pool Name: ORACLE_COPY > Device Class Name: LTO_TAPE > Estimated Capacity: 4.4 T > Scaled Capacity Applied: > Pct Util: 0.8 > Volume Status: Full > Access: Unavailable > Pct. Reclaimable Space: 99.2 > Scratch Volume?: Yes > In Error State?: No > Number of Writable Sides: 1 > Number of Times Mounted: 159 > Write Pass Number: 1 > Approx. Date Last Written: 09/25/2012 06:57:42 > Approx. Date Last Read: 07/17/2012 16:13:25 > Date Became Pending: > Number of Write Errors: 0 > Number of Read Errors: 0 > Volume Location: > Volume is MVS Lanfree Capable : No > Last Update by (administrator): ADMIN > Last Update Date/Time: 10/18/2012 09:55:30 > Begin Reclaim Period: > End Reclaim Period: > Drive Encryption Key Manager: None > Logical Block Protected: No > > Thanks, > > Tim Brown > This electronic transmission and any documents accompanying this electronic > transmission contain confidential information belonging to the sender. This > information may be legally privileged. The information is intended only for > the use of the individual or entity named above. If you are not the intended > recipient, you are hereby notified that any disclosure, copying, > distribution, or the taking of any action in reliance on or regarding the > contents of this electronically transmitted information is strictly > prohibited.
