It's also possible that a necessary volume was in use by another process or restore. As Ullrich said, run the reclaim again. Or you can use "Move data" for the volume.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Ullrich Mänz Sent: Thursday, February 07, 2013 11:07 AM To: [email protected] Subject: Antwort: [ADSM-L] tsm reclaim of copy pool Hi Tim, message ANR1163W is issued at the end of an offline reclamation process that ended before all data could be "moved" to a new copypool tape. Mostly, you'll get this message if the reclamation process was started using duration parameter. You may run the reclamation process again. - And check for messages just before ANR1163W. The data is taken from primary storage pools. best regards Ullrich Mänz Data Center Services FRITZ & MACZIOL Software und Computervertrieb GmbH Ludwig Str. 180D, 63067 Offenbach, Germany Mobil +49 170 7678 434 Fax: +49 69 3801 3500 10 Web: http://www.fum.de Amtsgericht Ulm, Handelsregister-Nummer: HRB 1936 Geschäftsführer: Heribert Fritz Inhaber: Imtech N.V., Gouda, Niederlande Von: Tim Brown <[email protected]> An: [email protected], Datum: 07.02.2013 19:54 Betreff: [ADSM-L] tsm reclaim of copy pool Gesendet von: "ADSM: Dist Stor Manager" <[email protected]> Shouldn't a reclaim of a copy pool get the data from the corresponding primary pool if all the tapes besides the current one is marked as offsite. Error message during reclaim: ANR1163W Offsite volume A00018L5 still contains files which could not be moved. (SESSION: 3848, PROCESS: 41) A00018L5 status is Full/Offsite. Thanks, Tim Brown Supervisor Computer Operations Central Hudson Gas & Electric
