Beware
instatape -A deletes and redefines all your tape devices, so you can't
use it if you have tapes in use.
HTH
Steve
Steven Harris
TSM Admin
Canberra Australia
On 22/06/2013 7:27 AM, David Bronder wrote:
Or just: /usr/lpp/Atape/instAtape -a
(That gets SMC devices, too.)
(Disclaimer: I've never tried it with LTO5 drives, but it works for
3590/3592 drives using Atape, so if you're using Atape for your LTO5
driver, I'd expect it to work.)
Alex Paschal wrote:
Hi, Bill. Honestly, there's no link required. You simply cable and
zone. Atape will handle the multipathing for you.
Here's a command to enable alt_pathing on all your tape devices:
lsdev -Cc tape | awk '{print $1}' | xargs -n1 -I asdf chdev -l asdf -a
alt_pathing=yes
Note: that -I is a dash-capital-eye
On 6/21/2013 8:12 AM, Bill Boyer wrote:
Anyone have a link to how to configure the dual fibre ports on an LTO5 drive
in a TS3310 tape library?
--
Hello World. David Bronder - Systems Architect
Segmentation Fault ITS-EI, Univ. of Iowa
Core dumped, disk trashed, quota filled, soda warm. [email protected]
