Tsm v7.1.1, RHEL 6.7 x86_64 platform Trying to get this amazon storage gateway thing going.
Got lin_tape installed, and it sees all ten drives in the test library. I think, from reading the administrator's guide, that I must use the tsm devicedrivers for the media changer, at least. Trying to follow the instructions in chapter 5 for configuring with the tsmscsi script. However, have two problems. 1. It says there are no devices in the lb.conf file will paste in below. 2. There is no op.conf.smp to copy and set up. 3. Is this necessary, and if so, could some one send me one? Lb.conf, and the rellavent portion of /proc/scsi/scsi follow: Section of /proc/scsi/scsi Host: scsi12 Channel: 00 Id: 00 Lun: 00 Vendor: AWS Model: Gateway-VTL Rev: 0100 Type: Medium Changer ANSI SCSI revision: 05 Lb.conf HOST[0]=12 CHANNEL[0]=0 ID[0]=0 LUN[0]=0 HELP!! Feel like I'm spinning my wheels.
