I can tell you what I did for my house/detached garage. I did flexible conduit through the attic and then solid conduit with LB outside/buried. I used Ubiquiti's preterminated cable. Not a big fan of the strands being totally open but I guess they're expecting me to have fiber demarc boxes.
I've got a bunch of pictures and I can video call you if you want to see how I did it. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jun 19, 2018 at 9:17 AM, Carl Peterson <[email protected]> wrote: > We are talking about 50' between buildings here and there aren't any > gophers in GA as far as I know. The nice thing about a pre-terminated > cable through microduct is that you can spare a pre-terminated cable and a > few couplers for fast restoration. > > On Tue, Jun 19, 2018 at 1:20 AM, Kevin Neal <[email protected]> > wrote: > >> You can buy armored Microduct, obviously higher cost than standard >> microduct. >> >> On Mon, Jun 18, 2018 at 3:40 PM, Jon Langeler <[email protected]> >> wrote: >> >>> And on top of it, what’s the price comparison of microduct? Can you buy >>> armored microfiber? >>> >>> Jon Langeler >>> Michwave Technologies, Inc. >>> >>> >>> >>> >>> On Jun 18, 2018, at 3:47 PM, Chuck McCown <[email protected]> wrote: >>> >>> I wonder if gophers will eat microduct. It is the same size of cables >>> they will eat. >>> >>> *From:* Carl Peterson >>> *Sent:* Monday, June 18, 2018 1:43 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] Pre-terminated Direct Burial Fiber >>> >>> Depends on what sort of strand count your looking for. >>> >>> One strand - I'd run 10/6 duct and push a pre-terminated pushable >>> Clearfield assembly through it. >>> up to 12 strands - I'd run 14/10 duct and pull a pre-terminated >>> ClearfieldMPO 12 strand through it. >>> Use tonable duct. >>> >>> >>> >>> More then that is kind of a pain because you need a much bigger duct to >>> pull through then cable. If you go this way, use staggered ends on your >>> pull end. >>> >>> >>> >>> On Mon, Jun 18, 2018 at 3:06 PM, Tim Cailloux <[email protected] >>> > wrote: >>> >>>> I need to connect two buildings about 50' apart via fiber. What's the >>>> best source for pre-terminated SM or MM fiber that can be directly buried? >>>> >>>> tim >>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>>> >>> >>> >>> -- >>> >>> Carl Peterson >>> >>> *PORT NETWORKS* >>> >>> 401 E Pratt St, Ste 2553 >>> >>> Baltimore, MD 21202 >>> >>> (410) 637-3707 >>> >>> ------------------------------ >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> >> >> >> -- >> >> *Kevin Neal*IT Director >> Safelink Internet >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
