Actually good timing on this question.... Yes, there are plans. Let me explain:
In the rackinjector, both the cambium sync and the polarity agnostic cards will pass through -48VDC just fine, and the 450i/450m's are fine with -48V. This would permit you to skip having a big DC-DC converter to power these radios from a -48VDC source. However, the existing (shipping in the past) control electronics in the rackinjector needs positive power, so you need to put at least a small DC-DC converter in place to power the control electronics from a positive source. Our intent has always been to resolve this shortcoming at some point when we figure out a reasonable solution. When we looked at rolling back the cambium sync technology into the din rail form factor, we decided that we really wanted to build an injector which didn't rely on positive power - so it could be powered from either positive or negative 48 with no requirement of a positive source. So we went to work figuring out how to do this. Which we have now done. As of now, the rackinjector has a new version of the control board which doesn't require a positive power source. For 450i/450m radios, feed it positive or negative, it's fine, and will power on. This applies to any control boards which have not yet shipped (we've got about a 1-2 week out of stock situation right now while we wait for the first batch of the new ones, all of the 'requires positive power' boards have been shipped). Now that is (almost) shipping, I'll be rolling the cambium sync technology back into the rackmount form factor, along with the technology which allows powering from either negative or positive power. This shouldn't be that long - probably 30-60 days, but definitely before the fall wispa show. On Thu, Jun 21, 2018 at 9:12 AM, Matt <[email protected]> wrote: > Are there plans to have a DIN mount device that supports CambiumSync? > The Rackmount is too big to fit in certain places. > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
