Yup. And there are any number of cable or conduit hangers you could
attach to the beam clamps.
The beam clamp has a threaded hole perpendicular to the set screw. Clamp
the set screw on a cross brace that you can reach from the climbing
leg. Screw a 1-hole conduit hanger into the beam clamp. Clamp an EMT
conduit up the tower using conduit hangers.
https://www.sitepro1.com/store/cart.php?m=product_list&c=5
https://www.sitepro1.com/store/cart.php?m=product_list&c=2
On 7/26/2018 12:00 PM, Bill Prince wrote:
Beam clamps.
https://www.google.com/search?q=beam+clamps&client=firefox-b-1-ab&tbm=isch&source=iu&ictx=1&fir=d91CXP9IXfiWMM%252CPOruSSPCZFOUMM%252C_&usg=__SMMMmpp3q_mOir_OYbRyXp23gjk%3D&sa=X&ved=2ahUKEwjJg6qjkb3cAhUC7p8KHSyWDMYQ_h0wD3oECAsQBA&biw=1245&bih=907#imgrc=_
bp
<part15sbs{at}gmail{dot}com>
On 7/26/2018 8:55 AM, Sam Lambie wrote:
Hey guys,
What do you use to attach ethernet cable to a large angle iron tower
leg? 7-9 inches on one side. I am not allowed to drill holes in the
legs, nor would I want to as it is at least 1/4" thick.
Thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
