Any reason you're not using ePMPs? Usually those are much better for simple/cost-effective speed and reliability.
Can you paste your MT configs (with any IP addresses / passwords blanked out). On Thu, Aug 9, 2018 at 2:34 PM, Justin Marshal <[email protected]> wrote: > Hi, > > > > I have 2 Mikrotik LHG G-5acD-XL’s set up as a PTP link (<1 mile). The > wireless mode on the AP is “Bridge”, and the wireless mode on the station > “Station Bridge”. > > > > I can get ~80Mbps across the wireless link with routers plugged into both > sides (using Mikrotik btest for testing). > > When the routers are replaced by computers directly plugged into the > radios (running iperf as a test or windows file transfers), the link maxes > out at 2.5Mbps. > > I’ve tried multiple computers/laptops and it still does the same thing. > > > > I’ve already read a few things about NV2 not working so well on the ARM > platform at the moment, so at the moment I’m running it as pure 802.11AC. > I’ve tried with Nstreme both disabled/enabled and this seems to have no > impact. > > Both radios are running 6.40.8 > > > > Why can I get ~80Mbps with routers on both ends, but when computers are > used, I can only hit 2.5Mbps. > > > > This link is actually replacing an older link with Nanostation M2’s, and > the same computers can transfer ~6.8Mbps when hooked up to the old link, > but can only do 2.5Mbps when hooked up the LHG’s > > > > Has anyone ran into something like this or happen to have any suggestions? > > > > Thanks, > > Justin > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
