Transmit signal at 350 MHz • Receive signal at 140 MHz 

“The maximum permitted IF cable length is 190 meters (620 ft) for CNT-400 
cable. If the required IF cable length is between 190 and 300 meters (620 ft 
and 980 ft), contact Technical Support. “
Another place shows 100 meters of cable = 8 dB loss.  So presumably you can 
have 16 dB of loss in the IF cable at 350 Mhz.

If the run is short enough you could probably get by with just about any kind 
of cable.  

From: Steve Jones 
Sent: Friday, August 31, 2018 11:35 AM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] Lmr400 and connectors in or about peoria illinois

So it's verified good odu, lmr or heliax is needed.

On Aug 31, 2018 12:09 PM, "Robert Andrews" <[email protected]> wrote:

  Oh do I not miss dealing with LMR-400/pigtails/connectors, 
  etc,etc,etc...  Just the noise off the dish to radio pigtails is still a 
  pita... 


  On 08/31/2018 10:04 AM, Steve Jones wrote:
  > Bringing down the ODU for testing. May need a line on that, think it's 
  > low 11
  > 
  > On Fri, Aug 31, 2018, 11:39 AM Rick Harnish <[email protected] 
  > <mailto:[email protected]>> wrote:
  > 
  >     You might check with Joshua Powell [email protected]

  >     <mailto:[email protected]>.  He may have what you
  >     need.____
  > 
  >     __ __
  > 
  >     Respectfully,____
  > 
  >     __ __
  > 
  >     ---------BaiCells_Tiny3---------____
  > 
  >     Rick Harnish____
  > 
  >     *__ __*
  > 
  >     Director of WISP Markets____
  > 
  >     __ __
  > 
  >     Baicells Technologies North America, Inc. <https://na.baicells.com/>____
  > 
  >     Mobile:  (260) 307-4000____
  > 
  >     __ __
  > 
  >     [email protected] <mailto:[email protected]>____
  > 
  >     www.facebook.com/baicells <http://www.facebook.com/baicells>____
  > 
  >     __ __
  > 
  >     __ __
  > 
  >     *From:* AF <[email protected]
  >     <mailto:[email protected]>> *On Behalf Of *Colin Stanners
  >     *Sent:* Friday, August 31, 2018 12:06 PM
  >     *To:* AnimalFarm Microwave Users Group <[email protected]
  >     <mailto:[email protected]>>
  >     *Subject:* Re: [AFMUG] Lmr400 and connectors in or about peoria
  >     illinois____
  > 
  >     __ __
  > 
  >      From quick search, check out these guys____
  > 
  >     __ __
  > 
  >     http://www.eastpeoriapawn.com/ham__cb_radio____ 

  > 
  >     East Peoria Trading Company & Discount Bagger Audio
  >     213 East Washington St.
  >     East Peoria, IL61611

  >     ph: 309-699-7296 ____
  > 
  >     __ __
  > 
  >     https://www.supremeradio.com/____
  > 
  >     4017 N Prospect Rd____
  > 
  >     Peoria Heights, IL 61616, USA ____
  > 
  >     309-682-0831 ____
  > 
  >     __ __
  > 
  >     __ __ 

  > 
  >     On Fri, Aug 31, 2018 at 10:59 AM Steve Jones

  >     <[email protected] <mailto:[email protected]>>
  >     wrote:____ 

  > 
  >         Are there any vendors in this vicinity with Lmr400 equivalent

  >         and terminations N____
  > 
  >         __ __ 

  > 
  >         Heliax 1/2 ldf 4 even better though tooling would need to be

  >         purchased.____
  > 
  >         __ __ 

  > 
  >         May need a ptp800, though it's doubtful anyone nearby would have

  >         the right one.____
  > 
  >         __ __ 

  > 
  >         We just got on site, but are trying to cover all bases ahead of

  >         time.____
  > 
  >         -- 
  >         AF mailing list
  >         [email protected] <mailto:[email protected]>
  >         http://af.afmug.com/mailman/listinfo/af_af.afmug.com____
  > 
  >     -- 
  >     AF mailing list
  >     [email protected] <mailto:[email protected]> 

  >     http://af.afmug.com/mailman/listinfo/af_af.afmug.com
  > 
  > 
  > 

  -- 
  AF mailing list
  [email protected]
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com




--------------------------------------------------------------------------------
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to