I ended up just doing all I could and leaving. Failure is always an irritating way to end a workweek
On Fri, Sep 14, 2018, 7:04 PM Mathew Howard <[email protected]> wrote: > 320s have the weird split pair power thing don't they (negative on 5/8 and > positive on 4/7 or something like that)? If so, I'm pretty sure it won't > work. > > I think an ePMP 2000 will work as long as you have positive on any one > pair, and negative on any pair, but I don't think you can have both on the > same pair. > > You could probably do some goofy wiring in a cat5 and make it work. > > On Fri, Sep 14, 2018 at 6:02 PM Colin Stanners <[email protected]> > wrote: > >> Pmp320 aps have reversed psu in a stange manner, I can look it up if you >> can wait a bit. >> >> On Fri, Sep 14, 2018, 5:58 PM Steve Jones <[email protected]> >> wrote: >> >>> I don't know pinout off hand. I came to a site to deal with a down >>> backhauls so I figured I'd make a set of access points live. Got done and >>> started to wire the packetflux gear and realised I left the power supply at >>> the shop. Will the 320 power supplies work in their native pinout for these >>> access points. I don't recall the current on the ap either. Would just be >>> nice to get these live to cut customers over remotely this weekend and wire >>> up the packetflux gear monday >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
