I'd vote for just Duplex LC footprint. Same as Simplex SC. Yes, you can plug two simplex LC into a duplex SC coupler.
My only request would be for enough space on either side to be able to get a mechanical SC in. Not 100% needed but if you can do it it would really help. It is hard to find outdoor armored patch cables without a breakout on one end so sometimes we just do a mechanical on 3mm drop cable. On Mon, Oct 1, 2018 at 8:45 AM Josh Luthman <[email protected]> wrote: > Most of the time the duplex connectors are two 1 strand 1 connector with a > plastic piece that puts the two together. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sat, Sep 29, 2018 at 6:58 PM, Jon Langeler <[email protected]> > wrote: > >> Typically sure with a coupler. Most of the time you can separate the >> duplex LC pigtails as well. There’s a small clip >> >> Jon Langeler >> Michwave Technologies, Inc. >> >> >> On Sep 29, 2018, at 6:24 PM, Chuck McCown <[email protected]> wrote: >> >> Can you plug a single LC into a duplex LC connector? >> >> *From:* Trey Scarborough >> *Sent:* Saturday, September 29, 2018 4:06 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] lc sc connectors >> >> >> I would say there is a standard dimension square hole that can either be >> one SC or duplex LC and is the only thing I would think ever be needed. You >> can always add your own then. >> >> On 9/29/2018 12:31 PM, [email protected] wrote: >> >> I guess another way to ask is, what connectors are people likely to want >> in something like this? >> Once I get a feel for that, then I will buy them and design the holder >> around them. >> >> *From:* [email protected] >> *Sent:* Saturday, September 29, 2018 11:12 AM >> *To:* [email protected] >> *Subject:* lc sc connectors >> >> Can you use a double connector to join single jumpers? I have never >> tried. >> >> Working on a combo DC surge suppressor with fiber storage and a place for >> the fiber connectors. I will have to have some sheet metal holders for the >> mini patch panel and am working out how many different cut out holes I will >> have to offer to cover all the potential uses. If I have one that will do >> two double LC connectors and a second option for two double SC, will that >> take care of most applications? >> >> >> >> -- >> >> Trey Scarborough >> VP Engineering >> 3DS Communications LLC >> p:9729741539 >> >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
