If this works, Tx and Rx at the same time means throughput goes up everywhere 
with everything (that adopts it), given that everything is now full duplex and 
not half duplex. No need for TDD. No need for FDD. It's all just FD. 

*IF* it works... 




----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




----- Original Message -----

From: "castarritt" <[email protected]> 
To: [email protected] 
Sent: Friday, October 19, 2018 3:00:47 PM 
Subject: Re: [AFMUG] Antenna article 


Why would you want the CPE to RX and TX at the same time/frequency when you can 
use OFDMA? 

My big question is if they can get this to work with MIMO. We already have 
better ways to get double the throughput of a single-chain omni. 


On Fri, Oct 19, 2018 at 2:29 PM Ken Hohhof < [email protected] > wrote: 





What do you do at the CPE end? Will one of these fit on a cellphone? 

From: AF < [email protected] > On Behalf Of [email protected] 
Sent: Friday, October 19, 2018 2:04 PM 
To: AnimalFarm Microwave Users Group < [email protected] > 
Subject: Re: [AFMUG] Antenna article 



Well... get on it! We don't have all day. 



On Fri, Oct 19, 2018 at 2:41 PM < [email protected] > wrote: 
<blockquote>





Very interesting article in the latest IEEE Antennas & Propagation Magazine 



Pseudo broadband omni that allows TX and RX on the same freq. 



The orientation of the elements provides something like 50 dB reduction of 
mutual coupling between the TX and RX signal. 



Then there is an analog cancellation stage that give another about 30 dB of 
cancellation. 



Then there is a digital section that automagically does another 30+ dB of 
cancellation. 



The TX signal ends up being down like 110-120 dB when it hits the receiver. 



If this can be perfected we double our channel throughput... 
-- 
AF mailing list 
[email protected] 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 

-- 
AF mailing list 
[email protected] 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 

</blockquote>

-- 
AF mailing list 
[email protected] 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 

-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to