Looking at a 3.3 and 3.5.1 AP where I see both MACs I can't mac-telnet from my CCR.
The one without a name looks like a short timeout. The one with the name looks like I get a refusal. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Nov 9, 2018 at 10:41 AM, Mathew Howard <[email protected]> wrote: > It works fine for me, but it looks like you need to use the wireless MAC > address, and not the ethernet MAC (this is on an AP in bridge mode, an SM > in router mode would be different, I assume). I initially just right > clicked on the MAC in the neighbor list in Winbox, and selected MAC, and it > connected fine... after that, I realized both MAC addresses were there, so > I tried the other one, and it just disconnected. > > On Fri, Nov 9, 2018 at 9:28 AM Justin Marshal <[email protected]> wrote: > >> Hi, >> >> >> >> I'm trying to get mac-telnet to work from a RouterOS device to an ePMP >> and it doesn't seem to be working. >> >> >> >> It immediately closes the connection as soon as i enter the password. >> >> When i hold my mouse over the tooltip on the setting for mac-telnet under >> configuration->system, it tells me that I need to change the password for >> it to work. I have done that and I am still getting the same results. >> >> >> >> Has anybody ever gotten mac-telnet to work from a RoterOS device >> connecting to an ePMP and if so, what is the trick? >> >> >> >> Thanks >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
