Motorola pls halp =(
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 14, 2018 at 12:01 PM, Justin Marshal <[email protected]> wrote: > I figured out that I was getting the SSH error only when logged into an SM > via mac-telnet. I was trying to rescue an SM that my script only made it > half way through before choking on an error > > > > Once I connected via SSH the config set command worked. > > > > But now that I think about it, it is kind of worrying that you can’t set > IP addresses through mac-telnet. You would think it’s the same exact shell > with the same commands available > > > > *From:* AF <[email protected]> *On Behalf Of * Josh Luthman > *Sent:* Wednesday, November 14, 2018 11:19 AM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] Using SNMP to change management IP's on ePMP > Bridged SM's > > > > IP Address > > config set networkBridgeIPAddressMode 1 //1 static, 2 dhcp (default) > > config set networkBridgeIPAddr 10.15.0.10 > > config set networkBridgeNetmask 255.255.255.0 > > config set networkBridgeGatewayIP 10.15.0.1 > > config save > > config apply > > > > I tried with set as an IP and string with no response either on 3.5.1 AP > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > <https://maps.google.com/?q=1100+Wayne+St+%0D%0ASuite+1337+%0D%0ATroy,+OH+45373&entry=gmail&source=g> > Suite 1337 > Troy, OH 45373 > > > > On Wed, Nov 14, 2018 at 9:07 AM, Justin Marshal <[email protected]> > wrote: > > Not that I’m having any better luck with SSH > > > > >config set networkBridgeIPAddr 10.10.73.233 > > Error: Parameter "10.10.73.233" doesn't exist > > > > > > Not sure what the issue is. I've had success with this in the past (prior > to 3.5.1) > > > > > > *From:* AF <[email protected]> *On Behalf Of *Justin Marshal > *Sent:* Wednesday, November 14, 2018 8:26 AM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* [AFMUG] Using SNMP to change management IP's on ePMP Bridged > SM's > > > > Hi, > > > > Having a really strange issue trying to use snmpset to change management > IP Addresses on ePMP Bridged SM's > > > > For e.g. > > snmpset -v 2c -c public 10.10.208.233 1.3.6.1.4.1.17713.21.3.4.7.2.0 a > 10.10.73.233 > > > > Gives the following error > > Error in packet. > > Reason: (badValue) The value given has the wrong type or length. > > > > However, if I run the same command and change the IP to something else in > the same subnet, it works fine: > > snmpset -v 2c -c public 10.10.208.233 1.3.6.1.4.1.17713.21.3.4.7.2.0 a > 10.10.208.240 > > iso.3.6.1.4.1.17713.21.3.4.7.2.0 = IpAddress: 10.10.208.240 > > > > Why is this? I didn't use to have this issue before with canopy > 100’s/450’s or even ePMP IIRC (maybe a different firmware version) > > Is there any way around it besides rewriting everything to use SSH? > > > > Thanks, > > Justin > > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
