Never use proxy-arp. Does not help. If you wish to bridge, bridge, it, don’t use proxy-arp to do it.
Dennis Burgess, Mikrotik Certified Trainer Author of "Learn RouterOS- Second Edition” Link Technologies, Inc -- Mikrotik & WISP Support Services Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/> Create Wireless Coverage’s with www.towercoverage.com From: AF <[email protected]> On Behalf Of Timothy Steele Sent: Thursday, November 15, 2018 9:17 AM To: AnimalFarm Microwave Users Group <[email protected]> Subject: [AFMUG] Mikrotik Pass Enabled Public in Route List to Eth8 how OK so I'm trying to learn this Mikrotik stuff I posted this on the Mikrotik forums a few days ago with no reply's We have Public IP's that we enable in the route list and I think it sends for proxy arp to Bridge to a sort of 1:1 NAT (the guy who set this up quite) and this works fine when we go to a clients house and install a Mikrotik and make a bridge My issue is we Have a Server on eth8 on the WAN Cloud Core router All I want to do is bridge a Public to eth8 but can't seem to be able to get it to work I enabled the public IP in the Route List and gave it the gateway of eth8 instead of the NAT IP as the gateway like all the others it says reachable and not bridge reachable like the other working ones do I need to create a Bridge? Thanks,
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
