I'd heatshrink some spiral wrap where the fiber meets the drop, that way it gives it some relief on the flexibility.
On Thu, Jan 3, 2019 at 3:43 PM Adam Moffett <[email protected]> wrote: > I'm kind of winging it because I haven't found an example to follow. Is > there a better way to do this? > > That's the orange bare fiber inside 16" of clear 900um furcation tube. > The connector is an SOC made for 900um cable. The furcation tube is > pushed about 3/4" into the end of the buffer tube and then a piece of > heat shrink ties the pieces of tubing together. > > It seems durable enough, but it's a lot of finicky pieces. Took about > 10 solid minutes to do this. I'm sure with practice I can shave that > down, but it just seems like there has to be an easier way. > > In a moment I'll send a pic of why I'm bothering..... > > -Adam > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Regards, Chuck
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
