This is what I understand. I am building Exalt to AF11X adapters non stop at the moment.
From: Colin Stanners Sent: Wednesday, February 6, 2019 10:19 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Exalt Wireless Support Exalt is totally dead AFAIK; Star Microwave, which used to do their tech support, still does some support, and has some spare equipment. If you need Exalt radio firmware updates or datasheets I have good stock of that for a few product series. I have never had good luck with Exalt XPIC. You may want to do a complete reboot of both radios and both ends at the same time, On Wed, Feb 6, 2019 at 11:11 AM Sam Lambie <[email protected]> wrote: Is it true that Exalt is totally dead? I am having issues with a set of Extend AIR XPIC radios and can't figure out if it is interference or radio failure. Anyone have suggestions? The radios are showing Modulation Mode 1 = 0 bits of traffic on the downlink. The other set is showing Mode 6 =598 mbps. But we rebooted the "bad" set and the "good" set went wonky, and the "bad" set works fine now..... -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
