Multiple links.
Eight PTP820's or Ceragon IP20C (which are the same thing), all XPIC,
and all on the maximum channel size. Probably a blend of both 18ghz and
11ghz in order to find enough channels.
You'll have a total of 16 chains which will be a little over 600mbps
each. So just about 10gig. I believe you can put them on 4 dishes
using dual radios and dual mounts. Use switches with link aggregation on
each end. You don't want unequal paths in link aggregation, so in bad
weather you can't be having 18ghz paths slow down by x amount while
11ghz paths slow down by y amount, so use link state propagation to kill
a link if it's ever degraded.
Definitely an arm and a leg. Each XPIC link is going to be north of
$20k, so probably a $160,000+ solution.
Definitely no guarantee you have all that bandwidth available to be
licensed, but it's not impossible.
On 2/19/2019 12:35 PM, Carl Peterson wrote:
Assuming this just ins't possible in the real world but I thought I'd
throw it at the list and see if anyone knew of anything even if it
cost an arm an and a leg. Obviously wireless, fiber would be too easy.
--
Carl Peterson
*PORT NETWORKS*
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
