Or you can make anything out of Unistrut.
From: AF <[email protected]> On Behalf Of Jesse DuPont Sent: Wednesday, February 20, 2019 6:23 PM To: AnimalFarm Microwave Users Group <[email protected]>; Nate Burke <[email protected]> Subject: Re: [AFMUG] Large dishes on sloped roofs We built this sled for the sloped part of a roof. We used aluminum angle. You'd probably want to use larger angle than we used, but any pipe size could be accommodated. Bolt through into attic with backing (wood or more angle) would be sufficient and easy to seal (we did mastic strips under the angle and siliconed the bolts). Jesse DuPont Network Architect email: [email protected] <mailto:[email protected]> Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc Like us! facebook.com/celeritybroadband <file://Users/jessedupont/Google%20Drive%20File%20Stream/My%20Drive/Celerity%20Broadband%20LLC/Marketing/Celerity%20Broadband%20Final__04.12.2015/Source%20Files/Celerity%20Broadband_cv-sig.png> On 2/20/19 4:35 PM, Nate Burke wrote: Looking for feedback on installing large dishes (2'-3' licensed) on a sloped asphalt shingle roof. I know that you can get some 2" J-legs with outriggers, but they might not be tall enough to mount the dish. Is it better to have the roofer come out and put in a pipe with a boot somehow attached to the trusses inside the roof. These will have to be somewhat hidden on the backside of the roof, so a ridgemount sled isn't an option. Anyone done one before? Pictures would be a bonus. Nate
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
