If this is reproducible, I would post to the ‘airFiber LTU Beta’ forum. Please take screenshots showing the problem. UBNT-Edmundas should be very interested, as the current thinking is that link management is working in that release.
Peter Kranz <http://www.unwiredltd.com/> www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-0000 <mailto:[email protected]> [email protected] From: AF <[email protected]> On Behalf Of Jason McKemie Sent: Wednesday, March 20, 2019 12:30 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] Airfiber remote device config I am able to ping the slave radio from the master radio's SSH interface, link management is on, and the country is set to US. On Wed, Mar 20, 2019 at 12:33 PM Peter Kranz <[email protected] <mailto:[email protected]> > wrote: No there is no remote credential needed. Can you ping the slave radio from the master radio’s SSH interface? Assume Link Management is ON on the System tab on the master? What country code are you using? Peter Kranz <http://www.unwiredltd.com/> www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-0000 <mailto:[email protected]> [email protected] From: AF <[email protected] <mailto:[email protected]> > On Behalf Of Jason McKemie Sent: Wednesday, March 20, 2019 8:33 AM To: AnimalFarm Microwave Users Group <[email protected] <mailto:[email protected]> > Subject: Re: [AFMUG] Airfiber remote device config Is there somewhere in the master interface to input credentials for the remote? On Wednesday, March 20, 2019, Josh Luthman <[email protected] <mailto:[email protected]> > wrote: Works in 1.1.2 for me. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> Suite 1337 <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> Troy, OH 45373 <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> On Tue, Mar 19, 2019 at 10:40 PM Jason McKemie <[email protected] <mailto:[email protected]> > wrote: 1.1.2 On Tue, Mar 19, 2019 at 8:50 PM Peter Kranz <[email protected] <mailto:[email protected]> > wrote: Software version? From: AF <[email protected] <mailto:[email protected]> > On Behalf Of Jason McKemie Sent: Tuesday, March 19, 2019 5:36 PM To: AnimalFarm Microwave Users Group <[email protected] <mailto:[email protected]> > Subject: Re: [AFMUG] Airfiber remote device config Strange, so it doesn't work? I'm unable to reconfigure the link without disconnecting the radios - it won't let me access settings on the remote radio since it is apparently "managed" by the master radio. On Tue, Mar 19, 2019 at 5:57 PM Timothy Steele <[email protected] <mailto:[email protected]> > wrote: I think I noticed a fix for that in the latest beta release notes On Tue, Mar 19, 2019, 6:30 PM Jason McKemie <[email protected] <mailto:[email protected]> > wrote: Is there a trick to getting the configuration changes to propagate to the remote radio on AF5XHD links? Every time I try I get the error message "could not apply changes on remote devices". -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
