I'm using a 2.4ghz Nanostation at a micropop to feed 4 houses in a
remote subdivision. It's the only UBNT that I'm doing multipoint with.
It's been installed for several years. This week, all of the SM's off of
the AP started having significant latency and packet loss. The AP is
responding flawlessly. There has been no change in modulation or Signal
levels to any of the Subs, and there is <5mb/s of total traffic on the
AP. Furthest connection is about 100 yards away from the AP.
Having not worked with UBNT in Multipoint, is there something to check
for to see why the latency is occurring? If it was additional noise, I
would have expected impact to modulation, but everyone is at 117/117 or
higher. Could there be a bad SM that's clogging up the works?
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
