reflectivity On Tue, May 14, 2019 at 10:09 AM Jason McKemie < [email protected]> wrote:
> Thanks, I was thinking something in the hardware as well. Might be a > grounding issue at this site. > > On Tuesday, May 14, 2019, Adam Moffett <[email protected]> wrote: > >> The distance would have to be calculated based on a signal's time in >> transit. I'd guess a clock failed. I couldn't say why that one unit or >> location as opposed to any other. >> >> >> On 5/14/2019 10:39 AM, Jason McKemie wrote: >> >> I've got a micropop that uses a Nanostation M2 as an AP with about 9 >> clients. Over the past few years I've replaced it a couple of times due to >> connectivity issues. They usually manifest themselves in the AP interface >> as much higher distances than are actually the case (normal distance .1 >> miles, AP says 5.2 miles). Is this bad hardware or is this how Ubiquiti is >> showing interference? It would be strange if it was interference since >> swapping the AP fixes it (a reboot also fixes the issue temporarily), but >> it is also strange that the same bug is continually showing up. Ideas? >> >> >> -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
