It's been promoted to the current branch as "ePMP System Release 4.3.2.1 / 15-May-19" - no longer in the beta branch.
ePMP-GPS_Synced-v4.3.2.1.tar.gz, ePMP-NonGPS_Synced-v4.3.2.1.tar.gz is the firmware for the EPMP1000/2000 radios, that will allow EPMP AC units to connect to EPMP1000/2000 APs. (forward compatibility) For the EPMP3000 AP ePMP-AC-v4.3.2.1.img allows backwards compatibility (clients must be running the matching firmware above to connect to a 3K AP) All EPMP1k/2k use .tar.gz for the packaging, all EPMP3k will use .IMG For the time being, no QOS/MIR exists in this firmware, so if you consider that not production ready like me, I see what your saying. The descriptions don't make this very clear. Joe On Fri, May 17, 2019 at 11:54 AM Andy Trimmell <[email protected]> wrote: > Stable? You mean stable beta? I meant production firmware if that’s what > you meant. I don’t see anywhere in production firmware that there’s a 4.x > firmware for 1000/2000 models. > > > > *From:* AF [mailto:[email protected]] *On Behalf Of *Darin Steffl > *Sent:* Friday, May 17, 2019 10:18 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] ePMP 3000 backwards compatibility > > > > Stable release of this was a few weeks ago. Download the 2nd stable > version released 2 days ago and it will work. > > > > Correct on being able to swap out a 1/2k AP for a 3k and all existing epmp > radios as well as elevate sm's will connect. They need to be updated to > latest version first though or they won't connect. > > > > Upgrading only the AP without any sm's yields a 10% boost in throughput as > well as some other rf gains of at least 3db on the uplink. Latency also is > improved by 50%. This is all without swapping a single sm. > > > > To realize mu-mimo benefits, I'd only swap your highest usage customers so > you can start realizing the 100% increase in capacity. That's our plan at > least. No point in swapping low GB usage subs to force 300 gear if they > won't see any benefit. > > > > On Fri, May 17, 2019, 8:58 AM Nate Burke <[email protected]> wrote: > > I haven't been following any of the 3000 Hype. Can you drop an EPMP3000 > AP in place of an EPMP1000AP and not have to change any customer radios? > Do you get any benefits without the Force300 SM? > > On 5/17/2019 8:49 AM, canopy--- via AF wrote: > > It works now. Download the latest firmware. > > > > On Fri, May 17, 2019 at 9:05 AM Andy Trimmell <[email protected]> > wrote: > > So when is this coming? Anyone have any news on this? > > > > Andy Trimmell > > *Business Manager* > > *PDS Connect* > > 317-831-3000 > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
