Whether it’s bands on resistors, or Cat5 wires, Asian manufacturers seem to have a problem with colors. Back in the old days when stuff was actually made in the U.S. of A., there was no confusing brown and orange, or white and grey, or blue and purple. But now all the colors are faded and a little off.
From: AF <[email protected]> On Behalf Of Chuck Macenski Sent: Wednesday, June 19, 2019 8:53 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] Today’s quiz The larger blank band separates the value from the accuracy band starts. As to what those colors actually are, well, I really couldn't tell. On Wed, Jun 19, 2019 at 3:26 PM <[email protected] <mailto:[email protected]> > wrote: Actually Ken got it right. My DVM was reading .802k and I had a brain fart thinking it was 802k and there was no way I could make 802K match the colors. Not sure why it cannot display 802 instead. Fluke. I even manually set the range and it just says over limit on the straight ohm setting. But I could not figure out which end to start reading from, the gray band looks like it could be white or silver to my eyes. So brown black blue black gray should be 106 ohms, right? How are you supposed to know which end to start with on these precision resistors? From: Ken Hohhof Sent: Wednesday, June 19, 2019 12:40 PM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] Today’s quiz Is that first band grey or white? Makes more sense that it’s grey. 806 ohms 1%. From: AF <[email protected] <mailto:[email protected]> > On Behalf Of Albert J Rachide Sent: Wednesday, June 19, 2019 1:37 PM To: AnimalFarm Microwave Users Group <[email protected] <mailto:[email protected]> > Subject: Re: [AFMUG] Today’s quiz 4060 ohms? Al Rachide Pink Hill, NC <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> www.avast.com On Wed, Jun 19, 2019 at 2:16 PM Chuck McCown <[email protected] <mailto:[email protected]> > wrote: What should the resistance be? Sent from my iPhone-- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com _____ -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
