FS Used to sell them, but stopped. They were really nice.
On 6/20/2019 5:46 PM, Sterling Jacobson wrote:
Yeah, that might be right.
Really just need to make sure it’s going to survive the winter/summer
cycles, both ends will be protected.
Not sure where to get 1m or 2m patch cables like these then unless I
do order custom?
Seems like some vendor should have something like this in stock.
*From:*AF <[email protected]> *On Behalf Of *Nate Burke
*Sent:* Thursday, June 20, 2019 4:09 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] Looking for unusual splice case
I don't think the #40384 is an actual outdoor cable. I was asking FS
For outdoor cables, and they said that only the custom length
indoor/outdoor cables are outdoor rated.
On 6/20/2019 4:48 PM, Sterling Jacobson wrote:
Actually I think I’ll just use these items from FS.com
Splice case for DFP-1246 #35858
LC duplex #76105
Cabinet side splice case for DFP-1246 #18013
1m Outdoor LC to LC SMF outdoor cable #40384
That should get me the splice case for outdoor/roof/tower and
inside/cabinet with LC if I just cut and splice some LC SMF patch
cords lying around.
And just lose patch shielded RJ45 male to female.
The screw terminals might work for DC positive and negative
distribution on the outdoor case, right?
*From:* AF <[email protected]>
<mailto:[email protected]> *On Behalf Of *Sterling Jacobson
*Sent:* Thursday, June 20, 2019 2:40 PM
*To:* AnimalFarm Microwave Users Group <[email protected]>
<mailto:[email protected]>
*Subject:* [AFMUG] Looking for unusual splice case
Continuing with my ‘new’ model POP/Tower distro.
I need an unusual splice case or solution to tower/roof terminate
Shireen SFP-1246 that has 4 C SMF fiber, 2 C 12 AWG and shielded
Cat6 Ethernet.
It would be best if I could mount it to a J arm, feed in the
Shireen, and be able to pull out up to three separate DC feeds,
one or two LC patch cables and a shielded Cat6 patch.
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
