Title: Re: [AFMUG] RB4011iGS+5HacQ2Hnd
Joe,
I had the baud rate at 9600 and 115200. I'm going to wait for the new cable, being I was just randomly using cables I had on hand. This one is less than 3 months old, so I'm only going to fiddle with it for a bit more and then see about doing a RMA.
--
Best regards,
Mark mailto:[email protected]
Myakka Technologies, Inc.
www.Myakka.com
------
Tuesday, June 25, 2019, 4:12:45 PM, you wrote:
|
I've seen the garbled console output when the baud rate doesn't match between clients, I'm not sure of the default setting of the RB4011 though.
I am also using the non-wifi version at my house. Very happy with it. It's a workhorse. Another thing I would try is swapping the power supply, if you have a spare one available.
On Tue, Jun 25, 2019 at 3:05 PM Mark - Myakka Technologies <[email protected]> wrote:
|
Ken,
Yeah indoors, top shelf, I'm sure the stale air up there gets a bit
toasty. May have to invest in a tiny fan to keep the air moving
around the new router.
--
Best regards,
Mark mailto:[email protected]
Myakka Technologies, Inc.
www.Myakka.com
------
Tuesday, June 25, 2019, 3:59:03 PM, you wrote:
KH> Only the non WiFi version. I worry a little about the thermal management
KH> compared to something like an 1100AHx4, the packaging is a little ...
KH> different. I assume yours is indoors though?
KH> -----Original Message-----
KH> From: AF <[email protected]> On Behalf Of Mark - Myakka Technologies
KH> Sent: Tuesday, June 25, 2019 2:50 PM
KH> To: AnimalFarm Microwave Users Group <[email protected]>
KH> Subject: [AFMUG] RB4011iGS+5HacQ2Hnd
KH> Is anyone using these? Have you had any issues? I purchased two
KH> of these a few months back.
KH> They work real nice. However, one of them went south today. Get just the
KH> power & SFP+ light. Never get any LAN lights. Tried several things with the
KH> reset button with no luck. Tried a few console cables, but just get
KH> garbage with one of the cables. Looking at the docs, it looks like it uses
KH> the cisco type of cable. Just ordered one that will be here on Friday.
KH> Looking like something got scrambled on the boot code.
KH> --
KH> Thanks,
KH> Mark mailto:[email protected]
KH> Myakka Technologies, Inc.
KH> www.Myakka.com
KH> --
KH> AF mailing list
KH> [email protected]
KH> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com |
|
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
