Good to know. Nice that they put it prominently in all the sales
literature.
On 6/26/2019 4:50 PM, Ryan Ray wrote:
Smart antenna is not active in current firmware. Cambium says the
functionality is still months out.
On Wed, Jun 26, 2019 at 2:48 PM Nate Burke <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
I just put up my first EPMP 3000 radio today. I have the 4x4 sector
antenna, and a smart Antenna connected to it. Due to scheduling
reasons, I was able to get the radio all programmed on the bench,
but I
couldn't connect the antennas until just before it went up the tower.
Is there anywhere in the 3000 that it tells you if the smart
antenna is
working, like on the EPMP2000 radio? Or is the smart antenna not
functional yet until a later firmware. The 2000 radio has the
section
on the status page talking about the smart antenna, I don't see
that in
the 3000 Status page.
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com