Haha I knew I should have prefaced this with stating I know how fingers and wrenches work :-D
I get your points and suggested much the same, but at the same time see their point. On Tue, Jul 2, 2019 at 4:40 PM Mathew Howard <[email protected]> wrote: > > Yeah, that seems a little goofy. just use a 5/16" or 8mm open end wrench, and > just go like half a turn past finger tight... it's not like it needs to be > very precise . > > On Tue, Jul 2, 2019 at 2:11 PM Ken Hohhof <[email protected]> wrote: >> >> What's the problem just using an ordinary 8 mm open end wrench? So you >> don't over torque them? They just need to be a little more than finger >> tight. Is over tightening really a problem? My issue with SMA connectors >> is usually weatherproofing them. >> >> -----Original Message----- >> From: AF <[email protected]> On Behalf Of Caleb Knauer >> Sent: Tuesday, July 2, 2019 1:37 PM >> To: AnimalFarm Microwave Users Group <[email protected]> >> Subject: [AFMUG] Bendable single use SMA torque wrench >> >> Any seen anything like this before? Bendable, single use SMA torque wrench. >> Trying to track down for a client and my google-fu is failing me. Pic >> attached. >> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
