You can either give me the wan IP + user and pass or you can go to teamviewer.com and download, choose run only and provide me with the ID + password, I can login to your computer and do the changes with you, in that case you don't need to provide me with any ip or credentials..
On Sat, Jul 6, 2019 at 3:17 PM Chuck McCown <[email protected]> wrote: > Thanks, we may take you up on that. What do you need from us? IP, > username &password? > > Sent from my iPhone > > On Jul 6, 2019, at 3:57 PM, TJ Trout <[email protected]> wrote: > > Chuck, I can make any changes you need via teamviewer? > > On Sat, Jul 6, 2019 at 8:01 AM <[email protected]> wrote: > >> Thanks, we will get back on this. Unless you want to visit scenic Lake >> Point, Utah today... >> >> *From:* Sterling Jacobson >> *Sent:* Friday, July 5, 2019 5:27 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] Gonna need some help please. >> >> >> DHCP client is under IP->DHCP Client then just disable or remove it >> altogether. >> >> >> >> You want to make sure you have a bridge under Bridge, and the Port tab of >> the bridge you can add/remove ethernet ports to the bridge. >> >> Leave the WAN ethernet port you are using OUT of any bridge so it routes >> by default. >> >> >> >> You would add an IP address 76.76.252.68/24 to your WAN Ethernet >> interface by going to IP->addresses and adding that entry assigned to that >> interface. >> >> You already have the gateway and DNS, so it should now route and you can >> do stuff from the routerboard online so to speak. >> >> >> >> Make sure you have a strong password. >> >> >> >> Also I would go in to IP->Services and disable all but Winbox and then >> add an internal IP range that you are handing out via DHCP as the only >> access range ie. 192.168.x.x/24 or whatever you are handing out. >> >> >> >> You an upgrade to latest by going to System->packages and Check for >> Updates, get latest from current and download and update from the button. >> >> It will reboot and then you go to System->Routerboard and hit Update for >> updating the firmware, after a second or two it will say done and that you >> should reboot, so do that and you should be current. >> >> >> >> >> >> >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *[email protected] >> *Sent:* Friday, July 5, 2019 12:49 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* Re: [AFMUG] Gonna need some help please. >> >> >> >> >> >> >> >> *From:* [email protected] >> >> *Sent:* Friday, July 5, 2019 12:48 PM >> >> *To:* AnimalFarm Microwave Users Group >> >> *Subject:* Re: [AFMUG] Gonna need some help please. >> >> >> >> Oh....After re-reading it looks like you're avoiding NAT by putting >> servers into a public /29. I completely misread what you were looking for. >> >> >> >> So yeah, by default the RB2011 will have the first Ethernet port set up >> as the WAN with DHCP, and everything exiting via that port gets >> masqueraded....so you'll want to change that masquerade rule so it only >> matches the private IP's. >> >> >> >> Add the static IP to ether1. ✔ >> >> Add the static default route by adding a route to destination 0.0.0.0/0 >> with gateway of 76.76.252.1.✔ >> >> Add static DNS servers under IP->DNS✔ >> >> Remove the DHCP-client on ether1. Not sure how to do this >> >> Add the /29 to interface bridge-local ✔ Maybe >> >> Under IP->Firewall->NAT, edit the masquerade rule by removing the "out >> interface" criteria. Add a new criteria for source IP 192.168.88.0/24. ✔ >> I think. >> >> >> >> Now your DHCP clients get private IP's and NAT, but your servers with >> static IP's don't. I think that's the bare minimum, and it ought to be >> dead simple in Winbox. >> >> >> >> Where do we put in the new IPs or IP range associated with this block >> they gave me? >> >> >> >> >> >> 76.76.254.48/29 routed to 76.76.252.68 >> WAN IP: 76.76.252.68 >> Subnet: 255.255.255.0 >> Gateway: 76.76.252.1 >> >> Routed subnet info: >> 76.76.254.48/29 >> subnet mask: 255.255.255.248 >> available IP's: 76.76.254.49-54 >> >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
