Are you using anything that actually needs 48v (vs 24v)? You could just run the Metrolinqs on 24v (27v float), and solve the problem that way.
On Fri, Jul 12, 2019 at 7:25 PM Chuck McCown <[email protected]> wrote: > I have found in practice that rectifier diodes conducting at half Ic they > drop closer to 1V > > Sent from my iPhone > > On Jul 12, 2019, at 3:19 PM, Bill Prince <[email protected]> wrote: > > From my engineering days, we used to use 0.7 volts voltage drop for > silicon power diodes when forward biased. > > -- > bp > part15sbs{at}gmail{dot}com > > > On Fri, Jul 12, 2019 at 12:29 PM <[email protected]> wrote: > >> You can just use 2-3 of those rectifier diodes I sent a link to. Just >> make sure whichever type of diode you use, that you bolt it to a chunk of >> aluminum or something to suck out some heat. You just put them in series. >> Does not matter if it is positive or negative. They will act as a smart >> resistor. >> >> They will just drop X amount of volts irrespective of how much voltage >> you put in to the system. >> >> *From:* Sterling Jacobson >> *Sent:* Friday, July 12, 2019 12:53 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] Still need help 50v DC regulator 6-10A >> >> >> Hmm, how does that work exactly in practice? >> >> >> >> Where do I solder in the 3v 7A Zener? Is it just in line with the >> positive or negative line? >> >> >> >> Or do I need to create a circuit with several of them in series and a >> resistor big enough to shed load between 48v and 56v when rush charging? >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Chuck McCown >> *Sent:* Thursday, July 11, 2019 5:43 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* Re: [AFMUG] Still need help 50v DC regulator 6-10A >> >> >> >> You could just put a 3 volt 7 amp zener diode in series too. >> >> Sent from my iPhone >> >> >> On Jul 11, 2019, at 5:07 PM, Sterling Jacobson <[email protected]> >> wrote: >> >> Oh wait, I see that these can be used in parallel and in different inputs. >> >> >> >> So really what I would do is get the DDR-240C-48 at 5A output, from a 48v >> battery string. >> >> Then if I needed more than 5A I just wire another unit in parallel per >> their diagram and have enough for 5-9A. >> >> >> >> Or if I just want/need two 12v batteries I can wire those in series for >> 24v and do UPS on that, and get one DDR-240B-48 instead. >> >> >> >> Basically what Jesse said, lol! >> >> >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Sterling Jacobson >> *Sent:* Thursday, July 11, 2019 4:51 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* Re: [AFMUG] Still need help 50v DC regulator 6-10A >> >> >> >> Ok, so instead of a 48v battery string, use a 24v battery string and >> connect up two 24v to 10A supplies on it and then connect the load/output >> side in series for 48v? >> >> >> >> >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Ken Hohhof >> *Sent:* Thursday, July 11, 2019 4:08 PM >> *To:* 'AnimalFarm Microwave Users Group' <[email protected]> >> *Subject:* Re: [AFMUG] Still need help 50v DC regulator 6-10A >> >> >> >> I’d use a Mean Well RSD-300C-48, but it’s not DIN rail mount and won’t >> meet your 10A requirement. >> >> >> >> One thought is that most isolated output DC-DC converters can have their >> output put in series, you could put two 24V 10A supplies in series. >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Jesse DuPont >> *Sent:* Thursday, July 11, 2019 4:26 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]>; Sterling >> Jacobson <[email protected]> >> *Subject:* Re: [AFMUG] Still need help 50v DC regulator 6-10A >> >> >> >> How about this one? It's only 5A, though, could run a pair of them and >> split the load. >> >> https://www.trcelectronics.com/View/Mean-Well/DDR-240C-48.shtml >> >> On 7/11/2019 2:59 PM, Sterling Jacobson wrote: >> >> Sorry to beat a dead horse, but I’m still stuck on this mini-pop DC plant >> thing. >> >> >> >> Is there a DIN mountable voltage regulator that will allow me to feed >> load from 48v battery string without going over 50v at 6-10A? >> >> >> >> I’m still trying to power a couple of MetroLinq 2.5 antennas at the site, >> but people tell me they explode if given more than say 52v. >> >> >> >> Which means my float battery system will kill the radios if it goes into >> recharge mode at 54v? >> >> >> >> Or am I overthinking things? >> >> >> >> Looks like to solve this I would need something like Mean Well $100 >> SD-350B-48 between the battery array and the load to assure it sticks >> around 50v. >> >> >> >> Is that my only solution here? >> >> >> >> >> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
