No button as far as I remember. you needed to plug a default box into the copper port when powering up. Its just a few of the pairs shorted together.
On Mon, Aug 12, 2019 at 1:14 PM Mathew Howard <[email protected]> wrote: > Are these an active link, or are you just wanting to re-use them? I think > they have a button to reset to defaults, if the latter. > > Also, have you tried the default IPs? If I remember correctly, that should > be 192.168.0.1 and 192.168.0.2 > > > On Mon, Aug 12, 2019 at 1:11 PM Sam Lambie <[email protected]> wrote: > >> Not a bad idea. >> >> On Mon, Aug 12, 2019 at 12:00 PM Colin Stanners <[email protected]> >> wrote: >> >>> Have you tried booting them up while connected to a PC running Wireshark >>> to see what packets they send out? >>> >>> On Mon, Aug 12, 2019 at 12:48 PM Sam Lambie <[email protected]> >>> wrote: >>> >>>> We have a set of Bridgewave radios that aren't on our network that were >>>> administered by at least 3 sysadmins. None of them left notes on what the >>>> IP's are. Anyone have a known way to get the IP's from those radios? >>>> Thanks >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
