It could be a slide rule stick. Assuming flat sides you could set top and bottom dia and the stick would calibrate itself
On Fri, Sep 6, 2019 at 11:30 AM Adam Moffett <[email protected]> wrote: > Bummer. > > On 9/6/2019 12:20 PM, [email protected] wrote: > > I discovered that there is no standard on the dimensions of the bucket. > > *From:* Adam Moffett > *Sent:* Friday, September 6, 2019 10:13 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] OT Afternoon project > > I wonder if someone already makes a gauge stick for 5-gallon buckets. If > not, then maybe there's a new product idea for you. Sounds like your > design work is half done already. > > On 9/2/2019 10:13 AM, Chuck McCown wrote: > > Yes then measured with a tape. I want to get a casting of the inside so I > can get some really accurate measurements so I can also do a calculated > version. Also I want to do one on a scale too. > > Sent from my iPhone > > On Sep 1, 2019, at 8:53 PM, Adam Moffett <[email protected]> wrote: > > So did you add 1 gallon at a time and mark graduations with a sharpie? > > On 8/31/2019 6:00 PM, [email protected] wrote: > > Needed to measure how much compressor oil was actually in a compressor. > So I made this. > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > ------------------------------ > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
