Would this be beneficial to put, say, all APs on a tower to the same
horizon value to help mitigate looped SMs?
Vlad
On 9/7/2019 9:40 PM, Louis Arsenault wrote:
I believe what you are looking for is split horizon.
https://wiki.mikrotik.com/wiki/Manual:MPLSVPLS#Split_horizon_bridging
Essentially "The basic idea of split horizon bridging is to make
traffic arriving over some port never be sent out some set of ports"
So ports that are in the same bridge group and you do not want traffic
forwarded between them then set the horizon value all the same.
On Sat, Sep 7, 2019 at 8:44 PM Paul McCall <[email protected]
<mailto:[email protected]>> wrote:
We are having a network problem.
I have a bridge at a tower that has a bunch of VLANs on it (going
up the tower on fiber to a Fiber/POE switch. I have each AP on a
separate VLAN, but all VLANs are in the "LANBridge". I am having
an AP acting up and want to separate communication between the
VLAN's on that bridge
I could enable IP Firewall on that bridge, but I don't know what
the Firewall rules would be for it to isolate the interfaces
(VLANs) on the bridge
*Paul McCall, President *
*Florida Broadband / PDMNet*
*658 Old Dixie Highway*
*Vero Beach, FL 32962*
*772-564-6800*
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
-Louis
NTInet
O: 803-533-1660 X 207
C: 803-997-0004
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
