Chuck I use 1U GMT fused distribution panels already. Looking for a simple busbar that I can plug a couple breakers into.
Ken, That is nice but way overkill. I'll likely just daisy chain the input lug of a few breakers but it seems like there should be a simple chassis you could plug the bullet style breakers into. On Tue, Sep 17, 2019 at 1:24 PM Ken Hohhof <[email protected]> wrote: > I have a site with a Newmar DST-20, they also make a DST-10, I bought it > several years ago from Tessco. I actually use it for a battery string > consisting of a whole bunch of front terminal telecom batteries, but it’s > really intended as a DC distribution panel. > > > > It’s quite nice, that said, it’s probably overkill for your application. > > > > *From:* AF <[email protected]> *On Behalf Of *Carl Peterson > *Sent:* Tuesday, September 17, 2019 11:59 AM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] DC breaker panel or fuse for two feeds. > > > > I know I should have a breaker, but I only have one output breaker and am > looking for a way to add one. i.e a1U chassis I could run a feed to and > plug in a few breakers. (like a fused dist panel but with say four breaker > positions) > > > > On Tue, Sep 17, 2019 at 11:44 AM Chuck McCown <[email protected]> wrote: > > My eltek has 4 breaker positions. Yes I would certainly want a breaker on > that second line. > > Sent from my iPhone > > > On Sep 17, 2019, at 8:57 AM, Carl Peterson <[email protected]> > wrote: > > > > I normally run #6 from an indoor rectifier/battery setup. The Eltek has > one output lug on a breaker with a common return plate. We have a building > that has two towers and we have an outdoor enclosure on each tower so I > need to run a second remote distribution panel. I could just bolt a second > lug on top of the first lug, but it seems to be these should each be on > their own breaker. is three any sort of rack mount breaker, inline fuse > holder with lugs, etc that I could add to each feed? > > <Screen Shot 2019-09-17 at 9.52.09 AM.png> > > > > -- > > AF mailing list > > [email protected] > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
