The 6000 had an oddball PoE. Models from 7000 onward has been 802.3at.
On 12/16/2019 6:03 PM, Colin Stanners wrote:
I believe that the 9000 is a re-badged Gemtek, on the Gemtek page it
says that a similar-looking model supports standard 802.3AT
https://www.gemteks.com/en/products/wireless-broadband/outdoor-cpe -
do you have a sacrificial CPE that you can test with such a PSU?
On Mon, Dec 16, 2019 at 1:57 PM SmarterBroadband <[email protected]
<mailto:[email protected]>> wrote:
Here you go.
*From:* AF [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *Colin Stanners
*Sent:* Friday, December 13, 2019 9:05 PM
*To:* AnimalFarm Microwave Users Group <[email protected]
<mailto:[email protected]>>
*Subject:* Re: [AFMUG] Replacement Telrad CPE9000 and 12000 POE
Adam, can you provide a photo of the label from these CPEs?
On Fri, Dec 13, 2019, 1:46 PM SmarterBroadband <[email protected]
<mailto:[email protected]>> wrote:
Has anyone found a source of replacement POE’s for Telrad
CPE9000 and 12000.
Thanks
Adam
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
