Same. We attached a funnel full of water to the end of a 2ft chuck of DC-1042. Left it for 24 hours expecting water to drip out the bottom. Never did. We started using it exclusively on our towers for the last 2 years. Not a single issue.
On Wed, Jan 29, 2020 at 11:29 AM Adam Moffett <[email protected]> wrote: > I remember dropping a chunk of that tape into a glass of water and > waiting for something to happen. Maybe I didn't wait long enough, but > nothing happened. > > > On 1/29/2020 11:59 AM, [email protected] wrote: > > The chemical reaction is pretty simple > > When chemical compound of 2 Hydrogen and 1 Oxygen atoms are present and > > come in contact to our (Non Caustic, Non-Woven, Super Swelling Polyester > > Bonding Material*) better known as "No-conductive water blocking tape" > > > > The following parametric occurs: > > > > Thickness [mm] 0.2 0.25 > > Weigh[g/m2] 80 90 > > Swelling height [mm] ?12 ?14 > > Swelling speed[mm/1st min] ?10 ?10 > > Tensile strength[N/15mm] ?45 ?50 > > > > Because of our Jacket composition, no change in OD has been observed. > > Because of the non-causticity, no damage has been observed to the 4 pairs > > insulation nor the solid 24 and 23 AWG copper core itself > > > > > > Thanks for your attention. > > > > > > -----Original Message----- > > From: AF <[email protected]> On Behalf Of Matt > > Sent: Wednesday, January 29, 2020 9:56 AM > > To: AnimalFarm Microwave Users Group <[email protected]> > > Subject: Re: [AFMUG] Cat5 Water Blocking Dry Tape > > > > So how does dry tape work anyway? I assumed it had some dry powder type > > glue in it and when exposed to water absorbed and cured blocking further > > passage of water? But not at all sure? > > > > -- > > AF mailing list > > [email protected] > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
