Thanks. I will give that a try. Some of the boxes will have conduit in and out. I watched a competition on youtube between electricians and they had the boxes up first I think.
I doubt my ability to cut and bend conduit to be able to fit a box that is already there. Then you have the connector. How do you assemble conduit to a box when you have to pull it back to fit it in the connector or fit the connector into the box. On some runs you can do that but not if the other end is already in a box. From: Cameron Crum Sent: Wednesday, February 5, 2020 9:46 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT Conduit and boxes question Conduit first is a little more forgiving as you just put your box at the end of the run. Otherwise, be prepared to have to measure, cut, bend, repeat. On Mon, Feb 3, 2020 at 11:12 AM <[email protected]> wrote: Shall I put up the boxes and then the conduit or the other way around? -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
