Thank you, sir!
On 2/14/2020 3:42 PM, Mathew Howard wrote:
Well, I went to the effort of walking several dozen feet to get one to
check for you...
Negative is tied to the chassis. I thought that was the case for
most/all Mikrotiks.
On Fri, Feb 14, 2020 at 2:29 PM Adam Moffett <[email protected]
<mailto:[email protected]>> wrote:
.....but I'd have to drive a whole 10 minutes to get to one.
On 2/14/2020 3:27 PM, Bill Prince wrote:
> Check the device to see if the either the negative side or the
> positive side are grounded to the chassis. If the power is floating
> relative to he chassis, then you should be OK.
>
> bp
> <part15sbs{at}gmail{dot}com>
>
> On 2/14/2020 12:18 PM, Adam Moffett wrote:
>> I noticed the CCR 1009 accepts 18-56V.
>>
>> Is it ok to run at -48V mingled in with positive ground equipment?
>>
>> I know I can get one and check, but I don't have one handy.
>>
>>
>>
>
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
