This was the best purchase we ever made and now we are using them as quick as 
they can build them. (which is a problem)
I can take one power source and inject any combination of setup we want.  So 
easy.

Just need quicker production and maybe some updated software.

Tyson Burris, President 
Internet Communications Inc. 
739 Commerce Dr. 
Franklin, IN 46131 
  
Office # 317-738-0320 
Cell/Direct # 317-412-1540 
Online: www.surfici.net 


What can ICI do for you? 

Broadband Wireless - PtP/PtMP Solutions - Mesh Wifi/Hotzones - IP Cameras - 
Fiber - Towers - Infrastructure. 
  
CONFIDENTIALITY NOTICE: This e-mail is intended for the 
addressee shown. It contains information that is 
confidential and protected from disclosure. Any review, 
dissemination or use of this transmission or its contents by 
unauthorized organizations or individuals is strictly 
prohibited. 

-----Original Message-----
From: AF <[email protected]> On Behalf Of Adam Moffett
Sent: Monday, February 17, 2020 4:51 PM
To: AnimalFarm Microwave Users Group <[email protected]>
Subject: [AFMUG] Packetflux Rackinjector

I'm *this close* to buying a Rackinjector.  That's actually a really clean, 
compact way to handle a site's power distribution.

This might be the dumbest sounding issue, but where do I put labels on it?  If 
I have one port jumper'd for AirFiber then I want to clearly mark that so the 
next person doesn't come along and plug something else in there.  I'm thinking 
I might put a 1U blank above it just to stick labels onto.

My next issue is taking the top off to re-jumper a port.  Say I have one port 
jumpered for AirFiber, but now I want to use that one for Cambium. Does that 
mean I have to disconnect everything and pull it out of the rack? Or I suppose 
I could leave enough slack that I could pull it out most of the way and hang it 
temporarily while I change jumpers live.  Is it safe to change jumpers live 
assuming I turn off the port I want to change?



--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to