The channel pairs are predefined On Fri, Mar 13, 2020, 7:31 PM Colin Stanners <[email protected]> wrote:
> To my knowledge the radios and dishes have enough isolation that H/L match > at a site is not necessary unless you're almost pointing in the > same direction with those dishes (or have a TX frequency at one site > overlapping a RX) . The opposite polarity increases the isolation so you > have even less worry in this case. That H/L match idea is more of a > tendency and to simplify planning than a rule. > > On Fri, Mar 13, 2020, 6:52 PM Ken Hohhof, <[email protected]> wrote: > >> I am having some 11 GHz links coordinated and the draft PCNs they sent me >> have one site high on one link and low on the other link. They are however >> different sub bands, and one is HPOL and the other is VPOL. Does this make >> it OK? I could probably do one of the links in 18 GHz. >> >> >> >> I had internalized the idea that you never had high and low at the same >> site. >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
