No QOS in the AP's or SM's for ePMP. 

Its like we get a random bad batch of them that don't like speed tests. 

-- 
Steven Kenney 
Network Operations Manager 
WaveDirect Telecommunications 
http://www.wavedirect.net 
(519)737-WAVE (9283) 


From: "Nate Burke" <n...@blastcomm.com> 
To: "af" <af@af.afmug.com> 
Sent: Thursday, April 2, 2020 2:59:09 PM 
Subject: Re: [AFMUG] ePMP Speed Tests 

If you are using the QOS in the AP, I think the linktest will only use what is 
not already consumed by the SM. It's not intrusive like the FSK/450 test was. 

On an SM with no other traffic, I always see the linktest to be what the QOS is 
set to. 

I have just started upgrading sites to 4.4.3, and have some EPMP3000 AP's out 
there. Randomly now, I will have an sm return 'linktest failed' when testing an 
EPMP1000SM to and EPMP3000 AP. Then the next text will work fine. 

On 4/2/2020 1:53 PM, Eric Muehleisen wrote: 



This has not been our experience. We do not rate-limit at the SM. We primarily 
rate-limit PPPoE at the core. We've found that our speedtest are usually 10-15% 
below the linktest results. 

On Thu, Apr 2, 2020 at 1:30 PM Steven Kenney < [ mailto:st...@wavedirect.org | 
st...@wavedirect.org ] > wrote: 

BQ_BEGIN

No example we'll get link tests at 80Mbps or higher and then their package is 
set to 25Mbps. We can see they are doing 20Mbps during the evenings etc. But 
when we go do a speed test anywhere it'll be 8 no matter what. 

I've confirmed the shaping of their connection is set to 100% to be sure. 

-- 
Steven Kenney 
Network Operations Manager 
WaveDirect Telecommunications 
[ http://www.wavedirect.net/ | http://www.wavedirect.net ] 
(519)737-WAVE (9283) 


From: "Josh Luthman" < [ mailto:j...@imaginenetworksllc.com ] [ 
mailto:j...@imaginenetworksllc.com | j...@imaginenetworksllc.com ] > 
To: "af" < [ mailto:af@af.afmug.com | af@af.afmug.com ] > 
Sent: Thursday, April 2, 2020 2:23:59 PM 
Subject: Re: [AFMUG] ePMP Speed Tests 

Linktest you mean? I've found it's 10% within TCP/UDP capacity. 
I'm exclusively 3.5.6 on epmp1000/2000 - no 4.x yet 

Josh Luthman 
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St 
Suite 1337 
Troy, OH 45373 


On Thu, Apr 2, 2020 at 2:07 PM Steven Kenney < [ mailto:st...@wavedirect.org ] 
[ mailto:st...@wavedirect.org | st...@wavedirect.org ] > wrote: 

BQ_BEGIN

Anyone have issues with certain model ePMP's not being able to get their speed 
tests? Even though their link tests are fine and more than capable, and we see 
customers traffic going much higher than the speed tests! It won't matter where 
we run the speed tests, they are always low. 

It only seems to be a handful of epmp radios. Not all. Mainly on 4.4.3 
firmware. 

We have been scratching our heads on this one. 

-- 
Steven Kenney 
Network Operations Manager 
WaveDirect Telecommunications 
[ http://www.wavedirect.net/ | http://www.wavedirect.net ] 
(519)737-WAVE (9283) 
-- 
AF mailing list 
[ mailto:AF@af.afmug.com | AF@af.afmug.com ] 
[ http://af.afmug.com/mailman/listinfo/af_af.afmug.com | 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com ] 




-- 
AF mailing list 
[ mailto:AF@af.afmug.com | AF@af.afmug.com ] 
[ http://af.afmug.com/mailman/listinfo/af_af.afmug.com | 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com ] 
-- 
AF mailing list 
[ mailto:AF@af.afmug.com | AF@af.afmug.com ] 
[ http://af.afmug.com/mailman/listinfo/af_af.afmug.com | 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com ] 

BQ_END




BQ_END


-- 
AF mailing list 
AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to