I assume you’ve checked that it’s not just a flaky Ethernet jack on the radio. I seem to remember the AF5x was known for that, but sometimes I misremember things.
From: AF <[email protected]> On Behalf Of Carl Peterson Sent: Tuesday, April 21, 2020 8:15 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] Need AirFiber5x I've got a used set in the warehouse if you need them. Might need to use the "name your price" tool. On Tue, Apr 21, 2020 at 7:06 PM Mathew Howard <[email protected] <mailto:[email protected]> > wrote: Yeah, well, that's why you keep old radios around when you replace them with other stuff... or you can always just buy some used ones to keep as spares. These things are by no means hard to find at this point. On Tue, Apr 21, 2020 at 6:36 PM Matt Hoppes <[email protected] <mailto:[email protected]> > wrote: Because of a radio failure. Two tower climbs is much more expensive and time consuming than just swapping a radio. On Apr 21, 2020, at 7:33 PM, Mathew Howard <[email protected] <mailto:[email protected]> > wrote: Ehh... the AirFiber 5x is a good radio. If it's a new link, or replacing both ends, then the Airfiber 5xHD is generally a pretty good replacement. The HD is better than the old 5x in some ways, and a bit worse in other ways, but they're both good radios. On Tue, Apr 21, 2020 at 5:32 PM Jaime Solorza <[email protected] <mailto:[email protected]> > wrote: I told guy who needs them to get some Cambium higher end radios... On Tue, Apr 21, 2020, 4:07 PM Matt Hoppes <[email protected] <mailto:[email protected]> > wrote: Ubiquiti really needs to realize they screwed the pooch by stopping production on that product. On Apr 21, 2020, at 5:22 PM, Sean Heskett <[email protected] <mailto:[email protected]> > wrote: <IMG_3622.jpg> Here’s what we’ve got. On Tue, Apr 21, 2020 at 2:59 PM Jaime Solorza <[email protected] <mailto:[email protected]> > wrote: Ok. Thanks On Tue, Apr 21, 2020, 2:35 PM Sean Heskett <[email protected] <mailto:[email protected]> > wrote: Hi Jamie, I think we have a decommissioned pair in our storage. I’ll go look later today. -Sean On Tue, Apr 21, 2020 at 2:31 PM Jaime Solorza <[email protected] <mailto:[email protected]> > wrote: We need an older model AirFiber5x... Any one know where we can get one? Thanks, El Dude -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
