nm on the bading slits, i was looking at it backward and thought he was using bands instead of ubolts
On Wed, Apr 22, 2020 at 11:50 AM Steve Jones <thatoneguyst...@gmail.com> wrote: > unless those have banding slits cut in them, he may want to put some > mattresses on the ground to catch the radios when the bands tear. > > That being said, assuming hes using the 3/4-1 inch bands and the style we > used to use, yes, you hammer the clamps. its kind of like kneading dough, > you have to roll them with the hammer. I havent used that tool in like 8 > years though > > On Wed, Apr 22, 2020 at 11:46 AM <ch...@wbmfg.com> wrote: > >> This is what he is installing: >> https://www.mccowntech.com/product/heavy-duty-pole-mount-1/ >> >> *From:* Carl Peterson >> *Sent:* Wednesday, April 22, 2020 10:37 AM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >> >> If he can post a quick video of what he is doing I'm sure we could >> critique it. I haven't done it myself in a decade but all the gear I put >> up on steel poles 10 years ago is still up and hasn't moved. Which of your >> brackets is he installing? Only thing I can think is the band isn't >> slipping through slots in the bracket and thus isn't getting tightened >> properly. >> >> >> >> On Wed, Apr 22, 2020 at 11:33 AM <ch...@wbmfg.com> wrote: >> >>> Yes, he has a banding tool. >>> >>> *From:* Carl Peterson >>> *Sent:* Wednesday, April 22, 2020 10:30 AM >>> *To:* AnimalFarm Microwave Users Group >>> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >>> >>> Slip? I'm assuming he has a banding tool? >>> >>> https://www.youtube.com/watch?v=3nLfRYjlnKU >>> >>> On Wed, Apr 22, 2020 at 11:26 AM <ch...@wbmfg.com> wrote: >>> >>>> Mitch Koep is in the field attempting to installing one of my pole >>>> mounts onto a steel monopole with stainless bands. I personally have never >>>> used bands on a steel pole. >>>> >>>> Any tips or pointers? Does he hammer the clip flat after bending the >>>> strap? He is trying it down at the base before hanging a bunch of >>>> expensive radios way up in the air and is having the strap slip. >>>> >>>> This is fairly time sensitive. I am sure Mitch would welcome a call if >>>> any of you have some experience with this. I suggested getting some rubber >>>> to put under the mount to increase friction. >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> >>> >>> -- >>> >>> Carl Peterson >>> >>> *PORT NETWORKS* >>> >>> 401 E Pratt St, Ste 2553 >>> >>> Baltimore, MD 21202 >>> >>> (410) 637-3707 >>> ------------------------------ >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> >> ------------------------------ >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
