Best-Tronics just made me fiber cables in 3 days. But of course, speed
comes with cost.
On 5/14/2020 5:47 AM, Paul McCall wrote:
Looking for a reliable source for getting custom fiber cables made
quickly. (and cost effectively).
We often do short runs (200 to 500 ft.) of fiber (usually just 2 LC
UPC connectors on it each end, with a pull eye) to go from building to
building, so in conduit, outdoor rated. While we do our own splicing
for other things, it seems simpler to have some of these made for us,
vs figuring out how to take a single strand (x2) spliced to a feed
cable and make that single strand be structurally solid and with a
pull eye on one end.
We do maybe one a month. Was using FS.COM but they are sometimes very
slow to make them and shipping on their outdoor cable is quite
expensive, nearly as much (or more than) the cable itself.
Looked at IntegraOptics but they are /at least/ (4) weeks out.
Paul
*Paul McCall, President *
*Florida Broadband / PDMNet*
*658 Old Dixie Highway*
*Vero Beach, FL 32962*
*772-564-6800*
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
