So dumb...
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Adam Moffett" <[email protected]> To: [email protected] Sent: Thursday, May 21, 2020 1:06:53 PM Subject: Re: [AFMUG] Tx/Rx Harris Stratex microwave comes to mind. The T3 connection to the Cisco needed to be Tx to Tx. And Rx to Rx. On 5/21/2020 2:02 PM, Steve Jones wrote: Ive never seen a tx port wanting the remote side to do the Tx, do you have any reference devices? On Thu, May 21, 2020 at 12:48 PM Adam Moffett < [email protected] > wrote: <blockquote> Sometimes when a port is labeled "Tx" they mean "this port transmits". Sometimes when a port is labeled "Tx" they mean "connect the transmit from your other device here". So sometimes you have equipment wanting cabling from Tx to Tx, and other times you want Tx to Rx. Is there some standard or rule of thumb for when it's done one way or the other? Or is it just a toss up? -Adam -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com </blockquote> -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
